Benutzer-Werkzeuge

Webseiten-Werkzeuge


hardware:sane_konica_minolta

Linux scanner drivers (SANE backends) for KONICA MINOLTA devices

Magicolor devices

These devices have a binary protocol, where each command starts with the hexadecimal byte '03' and each network command with '04'. Known devices using this protocol are:

  • KONICA MINOLTA magicolor 1690MF

Support for this scanner is already included in the Sane scanner driver (using the magicolor backend).

Further information:

Bizhub devices

These devices have a text-based protocol (SCL-derived), where each command starts with the escape sequence (hexadecimal '1b'), but only after a header of 12 bytes (binary, starting with hexadecimal '02'). Known devices using this protocol are:

  • KONICA MINOLTA bizhub C203

Further information:

Support for these scanners is not included in the Sane scanner library, and I have no plans to implement them.

UDP SNMP forwarding over SSH-Tunnel

ssh -L 1616:localhost:1616 root@k "socat tcp4-listen:1616,reuseaddr,fork UDP:10.0.0.5:161"
ssh root@`hostname` "socat -T15 udp4-recvfrom:161,reuseaddr,fork tcp:localhost:1616"
hardware/sane_konica_minolta.txt · Zuletzt geändert: 2017/05/02 16:13 von reinhold

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki