kubuntuonaceraspire5630
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung | ||
kubuntuonaceraspire5630 [2013/09/09 23:35] – [section 1] reinhold | kubuntuonaceraspire5630 [2013/09/09 23:36] (aktuell) – gelöscht reinhold | ||
---|---|---|---|
Zeile 1: | Zeile 1: | ||
- | |||
- | ====== General support ====== | ||
- | |||
- | Most hardware components worked out of the box after installation. In particular, the graphics card is automatically supported by the framebuffer as well as by the proprietary '' | ||
- | |||
- | Some selected hardware devices with comments: | ||
- | ^ PCI bus ^ PCI description ^ comments ^ | ||
- | |00:1b.0 | Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) | Works with snd_hda_intel module. | ||
- | |00:1e.0 | PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) | ???? | | ||
- | |00:1f.0 | ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) | ???? | | ||
- | |00:1f.2 | IDE interface: Intel Corporation 82801GBM/ | ||
- | |00:1f.3 | SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) | ???? | | ||
- | |01:00.0 | VGA compatible controller: nVidia Corporation Quadro NVS 110M / GeForce Go 7300 (rev a1) | Proprietary nvidia kernel module and nvidia Xorg module | | ||
- | |05:00.0 | Network controller: Intel Corporation PRO/ | ||
- | |06:01.0 | Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) | bm44 kernel module | | ||
- | |06:04.0 | CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10) | Works out of the box. | | ||
- | |06:04.1 | FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01) | No drivers yet. | | ||
- | |06:04.2 | SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01) | sdhci kernel module | | ||
- | |06:04.3 | FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01) | mmc card reader? no drivers yet. | | ||
- | |06:04.4 | FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01) | mmc card reader? no drivers yet. | | ||
- | |||
- | |||
- | ^ USB Bus ^ USB ID ^ USB name ^ Description ^ Comments ^ | ||
- | | Bus 004 Device 002 | 0a5c:2101 | Broadcom Corp. | Bluetooth device | Works out of the box. | | ||
- | | Bus 001 Device 002 | 046d:0896 | Logitech, Inc. | Acer OrbiCam | ||
- | |||
- | ====== ACPI ====== | ||
- | |||
- | The BIOS of the laptop didn't work with older kernels (DSDT problems), but it works fine with newer kernels, no custom DSDT required any more. | ||
- | |||
- | ====== Suspend, Hibernate ====== | ||
- | |||
- | In earlier kernels: After resuming, the suspend process hangs and cannot be killed. A second suspend does not work. | ||
- | |||
- | With newer Kernels >=2.6.18 it works just fine | ||
- | |||
- | ====== Modem ====== | ||
- | |||
- | Driver included in the alsa packages (snd_atiixp_modem module). You'll also need the sl-modem-daemon ubuntu/ | ||
- | |||
- | * I have once tried to make the modem work, but although /dev/modem is created, the modem does not seem to work. I have not had the time to investigate. | ||
- | * Using the alsa module, sound stops working! | ||
- | |||
- | ====== ACER Special Keys ====== | ||
- | |||
- | Simply load the '' | ||
- | modprobe -a -k acerhk force_series=290 usedritek=1 | ||
- | To let the module automatically be loaded, simply put the following line into ''/ | ||
- | acerhk force_series=290 usedritek=1 | ||
- | This enables all the acer special keys (Fn+F[1-8] keys, P, e, Mail, Web, and multimedia keys). They generate scancodes, and most of them are automatically mapped to the correct keycodes. those, that are not correctly mapped, '' | ||
- | [TODO] | ||
- | |||
- | To fix these, you can manually call '' | ||
- | # Help (?) button does not generate keycode # Fn+F1 Help -> KEY_HELP=138 | ||
- | setkeycodes e026 141 # Fn+F2 Acer eSetting -> KEY_SETUP=141 | ||
- | setkeycodes e027 139 # Fn+F3 ePowerManagement -> KEY_MENU=139 | ||
- | # Sleep (Zz) button does not generate keycode # Fn+F4 Sleep -> KEY_SLEEP=142 | ||
- | setkeycodes e078 154 # Fn+F5, switch display -> KEY_CYCLEWINDOWS=154 | ||
- | # Black screen ([*]>[ ]) button does not generate keycode, but works # Fn+F6 black screen | ||
- | setkeycodes e072 230 # Fn+F7, disable touchpad | ||
- | setkeycodes e071 231 # Fn+F7, enable touchpad | ||
- | | ||
- | setkeycodes e033 222 # Euro key, above "< | ||
- | setkeycodes e034 223 # Dollar key, above " | ||
- | # setkeycodes e059 224 # dim brightness | ||
- | setkeycodes e059 225 # Fn+" | ||
- | setkeycodes e055 232 # disable wlan chip (orange LED), (/ | ||
- | setkeycodes e056 233 # enable wlan chip (orange LED), (/ | ||
- | setkeycodes e057 146 # Bluetooth on->off -> KEY_DELETEFILE=146 | ||
- | setkeycodes e058 145 # Bluetooth off->on -> KEY_SENDFILE=145 | ||
- | setkeycodes e077 228 # Bluetooth button pushed to the right | ||
- | # setkeycodes e073 148 #Acer P -> KEY_PROG1=148 | ||
- | # setkeycodes e074 149 #Acer e -> KEY_PROG2=149 | ||
- | |||
- | ====== CD/DVD burner ====== | ||
- | Reading CDs and DVDs, as well as watching DVDs works just fine. Burning CDs and DVDs also works fine with kernel >=2.6.18 | ||
- | |||
- | ====== 5in1 card reader ====== | ||
- | SD cards work fine (sdhci kernel module), | ||
- | |||
- | It appears that a driver for the other slots is developed in the '' | ||
- | |||
- | ====== Sound ====== | ||
- | |||
- | The sound card works nicely with the '' | ||
- | |||
- | * Sound recording works (it took me a while to figure out that the capture channels were not set to " | ||
- | * Volume control for input channels does not work (kmixer and alsamixer do not stay in sync!) | ||
- | |||
- | ====== Bluetooth ====== | ||
- | |||
- | The device is an internal USB device, which can be activated via a switch on the front side of the laptop. Works out of the box. | ||
- | |||
- | ====== Webcam ====== | ||
- | It's a USB Acer/ | ||
- | Some versions of the GSPCA Probject (http:// | ||
- | |||
- | ====== Pinnacle PCTV USB Hybrid Stick ====== | ||
- | < | ||
- | This DVB-T receiver works just nicely with the em2880-dvb kernel module (it still has to be manually loaded until it is moved into the kernel source tree, so put it into / | ||
- | |||
- | After restarting the laptop, the device worked just out of the box. Starting '' | ||
- | |||
- | Even the remote control works (added as / | ||
- | |||
- | The analog TV receiver works with the em28xx kernel module alone, which is automatically loaded when plugging in the stick. Only the dvb module needs to be loaded manually. | ||
- | |||
- | ====== Misc comments ====== | ||
kubuntuonaceraspire5630.1378769700.txt.gz · Zuletzt geändert: 2013/09/09 23:35 von reinhold