Benutzer-Werkzeuge

Webseiten-Werkzeuge


hardware:sane_konica_minolta
Unterschiede

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
hardware:sane_konica_minolta [2013/03/13 11:42]
127.0.0.1 Externe Bearbeitung
hardware:sane_konica_minolta [2017/05/02 16:13] (aktuell)
reinhold
Zeile 2: Zeile 2:
  
 ===== Magicolor devices ===== ===== Magicolor devices =====
-These devices have a binary protocol, where each command starts with the hexadecimal byte '​03'​ and each network command with '​04'​. Known devices using this protocol ​ar:+These devices have a binary protocol, where each command starts with the hexadecimal byte '​03'​ and each network command with '​04'​. Known devices using this protocol ​are:
   * KONICA MINOLTA magicolor 1690MF   * KONICA MINOLTA magicolor 1690MF
 +
 +Support for this scanner is already included in the Sane scanner driver (using the magicolor backend).
  
 Further information:​ Further information:​
Zeile 17: Zeile 19:
   * [[:​hardware:​bizhub_scan|The scanning protocol of bizhub devices]]   * [[:​hardware:​bizhub_scan|The scanning protocol of bizhub devices]]
   * [[:​hardware:​bizhub_backend|The SANE backend for bizhub devices]]   * [[:​hardware:​bizhub_backend|The SANE backend for bizhub devices]]
 +
 +Support for these scanners is not included in the Sane scanner library, and I have no plans to implement them.
  
 ===== UDP SNMP forwarding over SSH-Tunnel ===== ===== UDP SNMP forwarding over SSH-Tunnel =====
hardware/sane_konica_minolta.txt · Zuletzt geändert: 2017/05/02 16:13 von reinhold