Benutzer-Werkzeuge

Webseiten-Werkzeuge


hardware:sane_konica_minolta

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Nächste Überarbeitung
Vorhergehende Überarbeitung
hardware:sane_konica_minolta [2011/08/19 16:36] reinholdhardware:sane_konica_minolta [2017/05/02 16:13] (aktuell) reinhold
Zeile 2: Zeile 2:
  
 ===== Magicolor devices ===== ===== Magicolor devices =====
-These devices have a binary protocol, where each command starts with the hexadecimal byte '03' and each network command with '04'. Known devices using this protocol ar:+These devices have a binary protocol, where each command starts with the hexadecimal byte '03' and each network command with '04'. Known devices using this protocol are:
   * KONICA MINOLTA magicolor 1690MF   * KONICA MINOLTA magicolor 1690MF
 +
 +Support for this scanner is already included in the Sane scanner driver (using the magicolor backend).
  
 Further information: Further information:
Zeile 17: Zeile 19:
   * [[:hardware:bizhub_scan|The scanning protocol of bizhub devices]]   * [[:hardware:bizhub_scan|The scanning protocol of bizhub devices]]
   * [[:hardware:bizhub_backend|The SANE backend for bizhub devices]]   * [[:hardware:bizhub_backend|The SANE backend for bizhub devices]]
 +
 +Support for these scanners is not included in the Sane scanner library, and I have no plans to implement them.
  
 ===== UDP SNMP forwarding over SSH-Tunnel ===== ===== UDP SNMP forwarding over SSH-Tunnel =====
hardware/sane_konica_minolta.txt · Zuletzt geändert: 2017/05/02 16:13 von reinhold

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki